4-102 System Programming
4.7.4 Digit Modification4.7.4 Digit Modification
Used to modify the user-dialed number so that it matches the requirements of the carrier.
Up to 48 Digit Modification tables can be programmed in the system.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the entry numbers of Digit Modification table
which you are going to program.
Displays the Modification Table number.
Specifies the number of digits to be deleted from the
beginning of the user-dialed number.
If you set to “0,”no digit is deleted from the user-dialed
number.
Specifies the dialing numbers to be added to the
beginning of the user-dialed number.
01 - 48
in 8 entries
increments
(01 - 08)
(Display only)
0 - 9
(0)
Up to 20 digits
consisting of
0-9, , # and P
(Pause).
(Blank)
Entry No.
Modification
Table No.
01 - 48
Remove Digits
Additional Dial
To Next Page
Loading...
