General Features
Features Guide 191
Toll Restriction for Special Carrier Access
Description
If your system has access to multiple telephone companies, access to a specific company
requires a carrier access code preceding the telephone number. Toll Restriction on these calls
is activated by storing the carrier codes (maximum 100). If a stored carrier code is found in the
dialed number, a toll restriction check starts for the succeeding telephone number.
Conditions
• Automatic Pause Insertion
A carrier access code is followed by Automatic Pause Insertion. It is possible to select the
pause time by System Programming.
Programming Guide References
• 3.2 Trunk Group
–PauseTime
• 5.7 Special Carrier Code
Features Guide References
1.6 Originating Features
• Toll Restriction
User Manual References
Not applicable.
To Next Page
Loading...
