General Features
Features Guide 207
Pause Insertion, Automatic
Description
Used to insert a pre-assigned pausing time between the access code (CO line / host PBX /
Centrex / Special Carrier) and dialed digits.
Conditions
• This feature requires previous programming of the access code (CO line / host PBX /
Centrex / Special Carrier) as well as assignment of the pause duration.
• This feature applies to:
This feature works for Speed Dialing, One-Touch Dialing, Last Number Redial, Saved
Number Redial, Pickup Dialing and Call Forwarding — to Trunk.
• Pause time (Manual)
Pressing the PAUSE button in dialing number inserts a pause for a pre-assigned time.
Programming Guide References
• 3.2 Trunk Group
–PauseTime
– PBX Access Code
• 5.7 Special Carrier Code
–Code
Features Guide References
1.3 System Features
• Host PBX Access
1.6 Originating Features
• Toll Restriction
User Manual References
Not applicable.
To Next Page
Loading...
