General Features
278 Features Guide
Hands-free Operation
Description
Allows the PT user to dial and to talk to the other party without lifting the handset. Pressing an
appropriate button provides hands-free mode.
Conditions
• This function can be utilized by pressing a button listed below when the SP-PHONE /
MONITOR button indicator is off:
– SP-PHONE button
– MONITOR button
– INTERCOM button
–CObutton
– DN button
• The hands-free mode is canceled if nothing is dialed within 10 seconds.
• PT with MONITOR button
The PT with MONITOR button can be used for hands-free dialing operations, etc., but
cannot be used for a hands-free conversation.
• Full One-Touch Dialing
A single press of a One-Touch Dialing button, DSS button, REDIAL button or a SAVE
button also provides the hands-free mode if Full One-Touch Dialing is activated.
Programming Guide References
System Programming is not required.
Features Guide References
1.6 Originating Features
• Full One-Touch Dialing
User Manual References
• 4.3.38 Full One-Touch Dialing
• 4.3.41 Hands-free Operation
To Next Page
Loading...
