TIE Line Features
Features Guide 381
Note
• If you want to restrict "call relay from PBX-1 to PBX-2 via PBX-3," set TG11 to "Yes" at
PBX-3 using Trunk to Trunk Restriction Programming.
Conditions
None
Programming Guide References
• 2.7 Trunk to Trunk Restriction
• 4.2 Trunk Line
– [DID/TIE] Digits to delete
– [DID/TIE] Number to be added
• 8.2 TIE Routing Table
– PBX Code
Features Guide References
None
To Next Page
Loading...
