TIE Line Features
Features Guide 383
b) Location Number (PBX Code) + Extension Number
Routing Procedure 1: TIE Routing Table
Provides for the routing of calls over the TIE Line Network. Up to 36 routing patterns can be
programmed in this table. This table is referenced by the system to identify the trunk route,
when an extension user made a TIE call by dialing the feature number for "TIE Line Access"
or "Other PBX 01-16." A routing pattern appropriate for each call is decided by the first 3 digits
(except TIE Line Access code) of the dialed number.
• Routing Table Override
If a TIE call is made by pressing a CO button, this table is not referenced by the system
and the call is routed over the specified TIE line directly.
(Programming Example)
A Network of TIE Lines
When "(TIE Line Access Code) + 951 + 1000" is dialed by an extension user, the routing
pattern for this call is decided by "951." Then the call is routed over TG10.
TIE Routing Table
No. Leading
Digit
Digits to
delete
Number to
be added
Trunk Group No.
01 02 03 04 05
01 951 0 10
02
:
++
or
TIE Line Access Code PBX Code Extension Number
CO (TIE) button
PBX-1
TIE Line
PBX Code 950
PBX-2
TG10
PBX Code 951
Ext. 1000 Ext. 1000
TG10
To Next Page
Loading...
