General Features
Features Guide 71
• The following programming items may be assigned in a different way between day mode
and night mode:
(2.2 Tenant)
— Alert Extension – Day / Night
(2.4 Class of Service (COS))
— TRS Level – Day / Night
(2.4.1 Trunk Group Setting)
— Trunk Group No. 01-48 – Day / Night
(3.2 Trunk Group)
— Intercept Destination – Day / Night
(3.3 Extension Group)
— [Overflow Setting] Destination – Day / Night
(3.5 Incoming Group)
— [Overflow Setting] Destination – Day / Night
(4.2 Trunk Line)
— Destination – Day / Night / Lunch / Break
(4.3 Extension Line)
— Intercept Destination – Day / Night
(4.5 Doorphone)
— Destination – Day / Night
(9.2 DID Dial Registration)
— Destination – Day / Night
• There are 2 types of switching modes: "Auto" and "Manual." The mode is set by the PC
programming or by entering the feature number "Night Mode Set / Cancel" or pressing the
Day/Nightbuttonbyallowedextensiononatenantbasis.
When the system is in "Auto" mode, the mode will be switched automatically in accordance
with timetable in 2-1 Tenant screen of the PC programming.
When the system is in "Manual" mode, the system keeps the current mode even though the
time to change the mode automatically has arrived.
• If DIL destination is not assigned for Lunch / Break mode, DIL destination performs in Day
mode as usual.
To Next Page
Loading...
