Panasonic KX-TD500 - Released Link Operation

General Features
86 Features Guide
Released Link Operation
Description
When Released Link Operation is enabled, an extension user will be automatically released
from a call (extension, outside) after transferring it to the destination, if the destination
extension is idle. This feature simplifies the transfer operation by eliminating the need for
going on-hook or pressing the RELEASE button after transferring the call.
This feature is convenient for extension users, such as Operators, who handle a large volume
of calls.
Conditions
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• Released Link Operation functions when transferring a call to the ordinary extensions or
floating extensions (extension group, incoming group, phantom extensions).
• If the destination party is busy, Camp-on Transfer is set by going on-hook.
• The SLT extension user cannot establish a conference call, if "Released Link Operation" is
enabled by System Programming.
Programming Guide References
• 2.4 Class of Service (COS)
– ReleasedLinkOperation
Features Guide References
1.11 Transferring Features
•CallTransfer
User Manual References
• 4.3.67 Released Link Operation