Station Features and Operation (PT/SLT)
202 User Manual
4.3.15 Call Splitting
Allows you to have two callers on a line and alternate between them. If a call comes in while
you are already on the line, you can place the current call (1st call) on hold and have a
conversation with the other party (2nd call).
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on hold temporarily (Consultation Hold
*1
)
When you are engaged in the 2nd call (inside), while placing the 1st call (inside) on
(exclusive) hold
*1
Consultation Hold places a call on hold temporarily to transfer it or makes a Conference call or Call Splitting.
PT
Press TRANSFER.
TRANSFER
You are connected to the 1st caller.
Pressing the TRANSFER button alternates
between two callers.
SLT
Flash the switchhook.
You are connected to the 1st caller.
Flashing the switchhook alternates between two
callers.
PT
Press HOLD.
HOLD
Pressing the HOLD button alternates
between two callers.
Between two extensions;
(ICM/CO type PT only)
To Next Page
Loading...
