Panasonic KX-TD500 - Station Speed Dialing Number;Name Assignment [KX-T7235;KX-T7431;KX- T7433;KX-T7436 Only]

Station Programming
User Manual 99
2.2.17 Station Speed Dialing Number/Name Assignment [KX-
T7235/KX-T7431/KX-T7433/KX-T7436 only]
Allows you to assign frequently dialed numbers and names to each Function button on your PT.
For KX-T7235 and KX-T7436 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
7235/7436
Press STORE.
Enter the desired number
(extension number,
phone number, etc.).
desired number
AUTO DIAL
STORE
PT-PGM Mode
F5
F4
F3
F2
F1
F10
F9
F8
F7
F6
Press Function (F1-F10).
The STORE indicator lights.
The display shows the initial
programming mode.
Up to 24 digits, consisting of 0 through 9, , #, FLASH, PAUSE, INTERCOM,
(“[” or “]” : secret) and CONF (-:hyphen), can be stored.
To store the telephone number of an outside party, the line access code (9 or 801
through 848) must be stored as the leading digit.
To erase the line, press the CLR (S2) button.
To store a name, press the NEXT(S3) button and go to step 3 in “To store a name”
as described in the following procedure.
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, “Not Stored” is displayed.)
<PT Display Example>
(– Outside number, 123-4567,
is now programmed.)
9-123-4567
CLR NEXT