Panasonic KX-TD816 - DID; DDI Extension - Day; Night

2.2 System Programming
110 General Programming
[137-138] DID / DDI Extension – Day / Night
Description
Determines the extension which receive a Direct Inward Dialling (DID) or Direct Dialling In
(DDI) call in both the day and night modes.
Selection
• Location number:
001 through 200
• Extension number:
2 through 4 digits / 0
(operator)
Default
All locations – Not stored
Programming
1.
Enter a
programme address (137 for day or 138 for night)
.
Display example: 137 DID NUM DAY
2.
Press
NEXT
.
Display: Location NO?
3.
Enter a
location number
.
To enter location number 001, you can also press
NEXT
.
Display example: #001:Not Stored
4.
Enter an
extension number
.
To change the current entry, press
CLEAR
and enter the new number.
To disable the DID, press
CLEAR
.
5.
Press
STORE
.
6.
To programme another location, press
NEXT
or
PREV
, or
SELECT
and the desired
location number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Assignable numbers are programmed in the following programmes.
Extension numbers — [003] Extension Number Set
ISDN extension numbers — [012] ISDN Extension Number Set
Voice Mail numbers — [118] Voice Mail Extension Number Set
Phantom numbers — [124] Phantom Extension Number Set
Floating numbers — [813] Floating Number Assignment (For a DID extension, a DISA
floating number is not assignable.)