2.2 System Programming
General Programming 111
• To use this programme for DID, "Transfer Table" must be selected first in programme
[135] DID Number Conversion Selection, and then the DID number must be assigned in
programme [136] DID / DDI Number Assignment.
• To use this programme for DDI, "Use" must be selected first in programme [154] DID
Transfer Table for DDI Call, and then the DDI number must be assigned in programme
[136] DID / DDI Number Assignment.
Features Guide References
Direct Dialling In (DDI)
Direct Inward Dialling (DID)
Day / Night Service
To Next Page
Loading...
