2.3 Timer Programming
136 General Programming
[210] Automatic Redial Interval Time
Description
Sets the interval time between Automatic Redial attempts.
Selection
Time (seconds):
3 through 120
( 10 is the actual time)
Default
KX-TD816BX, KX-TD1232(D)BX/ML, KX-TDN1232 – 60 s
KX-TD816HK, KX-TD1232HK – 900 s (15 min)
KX-TD1232X – 30 s
Programming
1.
Enter
210
.
Display: 210 REDIAL TIME
2.
Press
NEXT
.
Display example: Time: 60 sec
3.
Enter the
time
.
To change the current entry, press
CLEAR
and enter the new time.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• You enter a number from 3 through 120. The actual time is 10 times your input.
• Programme [209] Automatic Redial Repeat Times is used to set the number of times
Automatic Redial is tried.
• You cannot leave the entry empty.
Features Guide References
Redial
To Next Page
Loading...
