2.4 TRS / ARS Programming
General Programming 153
[312] ARS Mode
Description
Allows you to turn on or off the Automatic Route Selection (ARS) mode. ARS, if enabled,
selects the least expensive route to be used for an outside call.
Selection
On / Off
Default
Off
Programming
1.
Enter
312.
Display: 312 ARS MODE SET
2.
Press
NEXT.
Display example: ARS:Off
3.
Press
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
• If "Off" is selected, the Automatic Line Access feature functions instead of ARS.
• Programmes [313] through [331] are used to programme ARS.
Features Guide References
Automatic Route Selection (ARS)
Outside Line Access
To Next Page
Loading...
