2.4 TRS / ARS Programming
156 General Programming
[314-321] ARS Leading Digit Entry for Plans 1 through 8
Description
By entering numbers into each leading digit plan (programmes below) you are starting the
process to determine which outside line group will be used to route the call.
These eight plans are used to analyse the number which the user dials and decide the route plan
for the call. If the user-dialled number is registered in Plan 1, then Routing Plan 1 is selected
for the call. Automatic Route Selection (ARS) Leading Digit Entry for Plans 1 through 8 match
ARS Routing Plans 1 through 8 (programmes [322] through [329]) respectively.
Selection
• Location number:
001 through 100
• Leading digit number:
10 digits (max.)
Default
All locations – Not stored
Programming
1.
Enter a
program address (314 through 321)
.
Display example: 314 ARS LEAD D-1
2.
Press
NEXT
.
Display: Location NO?
3.
Enter a
location number
.
To enter location number 001, you can also press
NEXT
.
Display example: 001:Not Stored
4.
Enter a
leading digit number
.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another location, press
NEXT
or
PREV
, or
SELECT
and the desired
location number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Programme [314] [315] [316] [317] [318] [319] [320] [321]
Plan 12345678
To Next Page
Loading...
