2.5 Outside Line Programming
172 General Programming
8.
Press
END
.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• Outside lines 25 through 54 become available when the KX-TD290 or KX-TD188
expansion unit is installed in the KX-TD1232.
• To assign all outside lines to one outside line group, press the key in step 3. In this case,
the display shows the contents programmed for outside line 01.
Features Guide References
Outside Line Group
To Next Page
Loading...
