Panasonic KX-TD816 - Executive Busy Override - Outside Line

2.5 Outside Line Programming
General Programming 185
[409-410] Intercept Extension – Day / Night
Description
Intercept Routing provides an automatic re-direction of calls which cannot or have not been
answered (IRNA: Intercept Routing – No Answer). These programmes set the destination in
both day and night modes for each outside line group.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
• Extension number:
2 through 4 digits / Disable
(no Intercept Routing)
Default
All outside line groups – Disable (Day / Night)
Programming
1.
Enter a
programme address (409 for day or 410 for night).
Display example: 409 INTERCEP DAY
2.
Press
NEXT.
Display: TRK GRP NO?
3.
Enter the
outside line group number.
To enter outside line group number 1, you can also press
NEXT.
Display example: TRG1:Disable
4.
Enter an
extension number.
To change the current entry, press
CLEAR
and enter the new number.
To disable Intercept Routing, press
CLEAR.
5.
Press
STORE.
6.
To programme another outside line group, press
NEXT
or
PREV,
or
SELECT
and the
desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• To assign all outside line groups to one selection, press the key in step 3. In this case, the
display shows the contents programmed for outside line group 1.
• Programme [401] Outside Line Group Assignment is used to assign each outside line to
an outside line group.
• Assignable extension numbers are programmed in the following programmes.
Extension numbers – [003] Extension Number Set
ISDN extension numbers – [012] ISDN Extension Number Set