2.5 Outside Line Programming
188 General Programming
• There is a maximum of four access codes per outside line group. Each code has one or two
digits, consisting of
0 through 9,
and .
• If conflicting access codes (such as 8 and 81) are stored for the same outside line group, the
1-digit code (8) only will be in effect.
• When the programmed codes are dialled, Automatic Pause Insertion and Toll Restriction
are applied to the calls. The programmed pause time (in programme [412] Pause Time) is
automatically inserted after the access code.
• To assign all outside line groups to one selection, press the key in step 3. In this case, the
display shows the contents programmed for outside line group 1.
Features Guide References
External Feature Access
Host PBX Access
Pause Insertion, Automatic
To Next Page
Loading...
