Panasonic KX-TD816 - Outside Line Name Assignment

2.5 Outside Line Programming
196 General Programming
[417] Outside Line Name Assignment
Description
Assigns a name to each outside line so that the extension user can view the outside line number
and name when receiving an outside call. If Caller ID is assigned, each extension can select
either the initial display, Caller ID or outside line name, by Station Programming.
Selection
• Outside line (CO) number:
KX-TD816 –
01 through 08,
KX-TD1232 –
01 through 54,
( =all outside lines)
• Name:
10 characters (max.)
Default
All outside lines – Not stored
Programming
1.
Enter
417
.
Display: 417 CO LINE NAME
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter outside line number 01, you can also press
NEXT
.
Display example: CO01:Not Stored
4.
Enter a
name
.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new name.
5.
Press
STORE.
6.
To programme another outside line, press
NEXT
or
PREV,
or
SELECT
and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.