2.5 Outside Line Programming
General Programming 203
[433] DID / TIE Subscriber Number Removed Digit
Description
Assigns the removed digits of received a DID and TIE subscriber number for each DID / TIE
format. In this case, digits are removed from the beginning of the received digits.
Selection
• DID / TIE format number:
1 through 8
• Number of digits to be deleted (RMV):
0 through 6
(0=no deletion)
Default
All DID / TIE formats – RMV:0
Programming
1.
Enter
433.
Display: 433 REMOVE DIAL
2.
Press
NEXT.
Display: Format NO?
3.
Enter a
DID / TIE format number.
To enter DID / TIE format number 1, you can also press
NEXT.
Display example: 1:0
4.
Enter the
number of digits to be deleted.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another DID / TIE format, press
NEXT
or
PREV,
or
SELECT
and the
desired
DID / TIE format number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• You cannot leave the entry empty.
• You must confirm with your central office regarding the number of digits being sent.
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
To Next Page
Loading...
