Panasonic KX-TD816 - DID Disappearance Timer (for MFC-R2)

2.5 Outside Line Programming
218 General Programming
[447] DID Disappearance Timer (for MFC-R2)
Description
Assigns the length of waiting time of the stop signal from your central office.
Selection
• DID format number:
1 through 8,
( =all DID formats)
• Time (seconds):
1 through 30
Default
All DID formats – 24 s
Programming
1.
Enter
447
.
Display: 447 DISAPPEAR
2.
Press
NEXT
.
Display: Format NO?
3.
Enter a
DID format number
.
To enter DID format number 1, you can also press
NEXT
.
Display example: 1:24 sec
4.
Enter the
time
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another DID format, press
NEXT
or
PREV
, or
SELECT
and the desired
DID format number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• You cannot leave the entry empty.
• To assign all DID formats to one selection, press the key in step 3.
In this case, the display shows the contents programmed for DID format number 1.
Features Guide References
Direct Inward Dialling (DID)