Panasonic KX-TD816 - DID Forward Group-II Signal Code (for MFC-R2)

2.5 Outside Line Programming
General Programming 221
[450] DID Forward Group-II Signal Code (for MFC-R2)
Description
Assigns a Direct Inward Dialling (DID) call backward group-II signal code according to your
central office service.
Selection
• Code number:
01 through 15
•
Not Use / Subscriber / Operator / Collect
(collect call)
Default
Code 01=Not Use; Code 02=Subscriber; Code 03=Not Use; Code 04=Not Use; Code
05=Operator; Code 06=Not Use; Code 07=Not Use; Code 08=Collect; Code 09 to Code
15=Not Use
Programming
1.
Enter
450
.
Display: 450 FWD SIGN GP2
2.
Press
NEXT
.
Display: Code NO?
3.
Enter a
code number
.
To enter code number 01, you can also press
NEXT
.
Display example: 01:Not Use
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
To programme another code, press
NEXT
or
PREV
, or
SELECT
and the desired
code
number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
None
Features Guide References
Direct Inward Dialling (DID)