Panasonic KX-TD816 - Extension-To-Outside Line Call Duration Limit

2.6 COS Programming
228 General Programming
[502] Extension-to-Outside Line Call Duration Limit
Description
Allows you to restrict the duration of outside calls on a Class of Service (COS) basis.
Selection
• COS number:
1 through 8,
( =all COS)
•
Disable
(no limit) /
Enable
(limit)
Default
All COS – Disable
Programming
1.
Enter
502.
Display: 502 EXT-CO TIMER
2.
Press
NEXT.
3. Display: COS NO?
4.
Enter a
COS number.
To enter COS number 1, you can also press
NEXT.
Display example: COS1:Disable
5.
Keep pressing
SELECT
until the desired selection is displayed.
6.
Press
STORE.
7.
To programme another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number.
8.
Repeat steps 4 through 6.
9.
Press
END.
Conditions
• An outside call originated or answered by the programmed extension user is disconnected
when the time specified in programme [205] Extension-to-Outside Line Call Duration
Time expires.
• Extensions in limited classes cannot establish an outside-to-outside call, that is, cannot
transfer / forward an outside call to another outside line or perform an Unattended
Conference.
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
• Programme [990] System Additional Information, Area 02 - Bit 2 is used to programme
limited call duration to be done for outgoing calls only.