2.6 COS Programming
General Programming 233
[506] Executive Busy Override Deny
Description
Determines which Classes of Services (COS) are allowed to deny Executive Busy Override.
Executive Busy Override Deny allows the user to prevent Executive Busy Override from being
executed by another extension user.
Selection
• COS number:
1 through 8,
( =all COS)
•
Disable / Enable
Default
All COS – Enable
Programming
1.
Enter
506.
Display: 506 EXEC BSY DNY
2.
Press
NEXT.
Display: COS NO?
3.
Enter a
COS number.
To enter COS number 1, you can also press
NEXT.
Display example: COS1:Enable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
Features Guide References
Executive Busy Override
To Next Page
Loading...
