2.7 Extension Programming
General Programming 243
[601] Class of Service
Description
Programmes each extension for Class of Service (COS). The COS determines the call handling
abilities of each extension.
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2),
KX-TD1232 –
01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• COS number:
1 through 8
Default
All jacks-1/2 – COS 1
Programming
1.
Enter
601.
Display: 601 COS #
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering a jack number.
Display example: #01-1:COS1, COS1
4.
Enter a
COS number.
To change the current entry, enter the new number.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• There is a maximum of eight Classes of Service. Every extension must be assigned to a
Class of Service and is subject to the COS Programming of programmes [5XX] and [991].
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
To Next Page
Loading...
