Panasonic KX-TD816 - Extension Group Assignment

2.7 Extension Programming
General Programming 245
[602] Extension Group Assignment
Description
Assigns each extension to an extension group. Extension groups are used for Group Call
Pickup, Station Hunting, and Paging – Group.
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2),
KX-TD1232 –
01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Extension group number:
1 through 8
Default
All jacks-1/2 – Extension group 1
Programming
1.
Enter
602.
Display: 602 EXT GROUP #
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering the jack number.
Display example: #01-1:EXG1
4.
Enter the
extension group number.
To change the current entry, enter the new extension group number.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• There is a maximum of eight extension groups. Each extension can only belong to one
group.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.