2.7 Extension Programming
248 General Programming
9.
Press
END.
Conditions
• An extension can be assigned as the destination of as many outside lines as required.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Methods.
• To assign all jacks or all outside lines to one selection, press the key in step 3 or step 4.
In these cases, the display shows the contents programmed for Jack 01 or for outside line 01.
• There are six notification methods:
a) Immediate ringing: rings immediately
b) 1 ring delay
c) 3 ring delay
d) 6 ring delay
e) No ring: only the indicator flashes
f) Disable: no incoming call
• When you change the jack number by pressing
NEXT
or
PREV,
the outside line number is
not changed. Example #03-1:CO06.....Press
NEXT
.....#03-2:CO06
Features Guide References
Day / Night Service
Direct In Lines (DIL)
To Next Page
Loading...
