Panasonic KX-TD816 - Outgoing Permitted Outside Line Assignment - Day; Night

2.7 Extension Programming
General Programming 249
[605-606] Outgoing Permitted Outside Line Assignment – Day /
Night
Description
Determines the outside lines which can be accessed by an extension in both day and night
modes. The extension users can make outgoing outside calls using the assigned outside lines.
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2),
KX-TD1232 –
01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Outside line (CO) number:
KX-TD816 –
01 through 08,
KX-TD1232 –
01 through 24,
( =all outside lines)
•
Enabl
(enable) /
Disab
(disable)
Default
All jacks-1/2 – All outside lines – Enable (Day / Night)
Programming
1.
Enter a
programme address (605 for day or 606 for night).
Display example: 605 CO DAY OUT
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering a jack number.
Display example: #01-1:CO01:Enabl
4.
Enter the desired
outside line number,
or keep pressing or until the desired outside
line is displayed.
To change the current entry, enter the new number.
5.
Keep pressing
SELECT
until the desired selection is displayed.
6.
Press
STORE.
7.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
8.
Repeat steps 4 through 7.
9.
Press
END.