2.7 Extension Programming
General Programming 251
[607-608] Doorphone Ringing Assignment – Day / Night
Description
These programmes assign the extensions which will ring when a doorphone call is received
during the day and night modes. Programmed extensions are also allowed to open the door.
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2),
KX-TD1232 –
01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Doorphone number:
KX-TD816 –
1 and 2, two entries (max.)
KX-TD1232 –
1 through 4, four entries (max.)
Default
Jack 01-1– All doorphones; Other jacks – no doorphone (Day / Night)
Programming
1.
Enter a
programme address (607 for day or 608 for night).
Display example: 607 DOOR SET DAY
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering a jack number.
Display example: #01-1:1234
4.
Enter the
doorphone numbers.
To assign no doorphone, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new doorphone numbers.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
To Next Page
Loading...
