2.7 Extension Programming
General Programming 253
[609] Voice Mail Access Codes
Description
Assigns a mailbox number for each extension, only if programme [990] System Additional
Information, Area 02 - bit 8 is set to "free".
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2)
KX-TD1232 –
01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Mailbox number:
16 digits (max.)
Default
All jacks – Not stored
Programming
1.
Enter
609.
Display: 609 V-MAIL CODES
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number
.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering a jack number.
Display example: #01-1:Not Stored
4.
Enter a
mailbox number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
To Next Page
Loading...
