2.7 Extension Programming
General Programming 259
[620] Lunch / Break Group Assignment
Description
Assigns extensions for a lunch / break group.
A lunch / break group can be assigned to up to 8 extensions (PT / SLT).
Selection
• Group number:
1 through 8
• Location number:
1 through 8
• Extension number:
2 through 4 digits
Default
All groups – Blank
Programming
1.
Enter
620
.
Display: 620 LUN/BRK EXT
2.
Press
NEXT.
Display: Group NO?
3.
Enter a
group number.
To enter group number 01, you can also press
NEXT.
Display example: #1-1:
4.
Enter the desired
extension number.
To change the current entry, enter the new number.
Display example: #1-1:101
5.
Press
STORE.
6.
To programme another location, press
NEXT
or
PREV,
or
SELECT
and the desired
group
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• This programming can only be used if DIL1:1 for lunch / break group is set.
• ISDN extensions, phantom extensions, floating numbers and voice mail extensions cannot
be assigned to a lunch / break group.
Features Guide References
Day / Night Service
To Next Page
Loading...
