Panasonic KX-TD816 - Music Source Use

2.8 Resource Programming
General Programming 267
[803] Music Source Use
Description
Assigns the music source to be used for Music on Hold and Background Music (BGM).
Selection
•
Hold / BGM
• Music source number:
KX-TD816 –
1 / No Use
KX-TD1232 –
1 through 4 / No Use
Default
Hold and BGM – Music 1
Programming
1.
Enter
803.
Display: 803 MUSIC SOURCE
2.
Press
NEXT
to programme Music on Hold.
Display example: Hold:Music1
3.
Enter a
music source number.
To select no music source, press
CLEAR.
To change the current entry, enter the new music source number.
4.
Press
STORE.
5.
Press
NEXT
to programme BGM.
Display example: BGM :Music1
6.
Enter a
music source number.
To select no music source, press
CLEAR.
To change the current entry, enter the new music source number.
7.
Press
STORE.
8.
Press
END.
Conditions
• The music source is a user-supplied item. For KX-TD816, one music source can be
installed, for KX-TD1232, two music sources can be installed per system. Music sources 1
and 2 are connected to the Master System, 3 and 4 are to the Slave, if available. Any music
source can be used by either system.
• The system is provided with an internal music source. By default setting, internal music
source is used as Music Source 1. It is possible to select external music source for Music
Source 1 in programme [990] System Additional Information, Area 02-Bit 10.