Panasonic KX-TD816 - Page 273

2.8 Resource Programming
General Programming 273
Display example: Baud Rate:9600
6.
Keep pressing
SELECT
until the desired selection is displayed.
7.
Press
STORE.
8.
Press
NEXT
to programme word length.
Display example: Word Lengt:8bits
9.
Keep pressing
SELECT
until the desired selection is displayed.
10.
Press
STORE.
11.
Press
NEXT
to programme parity bit.
Display example: Parity:Mark
12.
Keep pressing
SELECT
until the desired selection is displayed.
13.
Press
STORE.
14.
Press
NEXT
to programme stop bit.
Display example: Stop Bit:1bit
15.
Keep pressing
SELECT
until the desired selection is displayed.
16.
Press
STORE.
17.
Press
END.
Conditions
• The following combinations are invalid.
• The programme address of the out-of-service system port is unacceptable.
Features Guide References
Station Message Detail Recording (SMDR)
Parity Word Length Stop Bit
Mark 8 2
Space 8 1
Space 8 2