2.8 Resource Programming
274 General Programming
[809] DISA Security Type
Description
Assigns the security mode for outside calls attempted by the DISA (Direct Inward System
Access) caller. There are three modes as follows.
Non Security mode
: allows the caller to access an outside line without dialling a DISA user
code.
Trunk (Outside Line) Security mode
: requires the caller to enter a DISA user code before
making an outside call.
All Security mode
: requires the caller to enter a DISA user code before making both an outside
call and an intercom call.
Selection
Non
(non security) /
Trunk
(outside line security) /
All
(all security)
Default
Trunk
Programming
1.
Enter
809.
Display: 809 DISA SECURE
2.
Press
NEXT.
Display example: Security:Trunk
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
Programme [017] DISA / TIE User Codes is used to programme DISA user codes.
Features Guide References
Direct Inward System Access (DISA)
To Next Page
Loading...
