2.8 Resource Programming
General Programming 275
[810] DISA Tone Detection
Description
Enables or disables Tone Detection for outside-to-outside line calls via the Direct Inward
System Access (DISA) feature. Enabling tone detection allows the system to detect the end of
the call.
Selection
Enable / Disable
Default
Enable
Programming
1.
Enter
810.
Display: 810 DISA TONE
2.
Press
NEXT.
Display example: Tone DTC:Enable
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
None
Features Guide References
Direct Inward System Access (DISA)
To Next Page
Loading...
