2.8 Resource Programming
General Programming 279
[814] Modem Standard
Description
Assigns the modem standard. There are two standards available – BELL and CCITT.
Selection
BELL / CCITT
Default
CCITT
Programming
1.
Enter
814.
Display: 814 MODEM TYPE
2.
Press
NEXT.
Display example: MODEM:CCITT
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
Select the standard used by your modem.
Features Guide References
System Programming and Diagnosis with Personal Computer
To Next Page
Loading...
