3.1 Manager Programming
286 ISDN Programming
[013] ISDN Extension Name Set
Description
Assigns names to the ISDN extension numbers programmed in programme [012] ISDN
Extension Number Set.
Selection
•Port number:
KX-TD816 –
01 through 06
KX-TD1232 –
01 through 12
• Name:
10 characters (max.)
Default
All ports – Not stored
Programming
1.
Enter
013.
Display: 013 ISDN NAME
2.
Press
NEXT.
Display: Port NO?
3.
Enter a
port number.
To enter the first port number, you can also press
NEXT.
Display: #01:Not Stored
4.
Enter a
name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new name.
5.
Press
STORE.
6.
To programme another port, press
NEXT
or
PREV
, or
SELECT
and the desired
port
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• Port numbers 01 through 06 are for the Master System and 07 through 12 are for the Slave,
if available.
To Next Page
Loading...
