Panasonic KX-TD816 - Page 29

2.1 Manager Programming
General Programming 29
12.
Enter the
hour.
To change the current entry, press
CLEAR
and enter the new hour.
13.
Press .
14.
Enter the
minute.
To change the current entry, press
CLEAR
and enter the new minute.
15.
Press .
16.
Press
SELECT
for AM or PM.
17.
Press .
18.
Press
SELECT
for 12 or 24 (clock hour).
19.
Press
STORE.
20.
Press
END.
Conditions
• After changing an entry, you can press
STORE.
You do not have to perform the rest of the
steps.
• To return to a previous field, press in steps 4 through 9 and steps 13 through 18.
• If you hear an alarm after pressing
STORE,
check that the date is valid.
• The clock starts immediately after the
STORE
button is pressed.
• You cannot leave an entry empty.
Features Guide References
Display Message