2.1 Manager Programming
General Programming 35
Conditions
• There is a maximum of 32 extension numbers for KX-TD816, and 128 extension numbers
for KX-TD1232. Each extension number can be two, three, or four digits, consisting of
0
through 9.
The and # keys cannot be used.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• An extension number is invalid if the first or second digits do not match with the programme
[100] Flexible Numbering, (01) - (16) 1st through 16th hundred extension blocks" setting.
If one digit is assigned as the leading digit, some extensions have two digits and some have
three digits. If two digits are assigned, some have three digits and some have four digits.
• Two extension numbers can be assigned per jack. If eXtra Device Port (XDP) is disabled
for the jack in programme [600] EXtra Device Port, the extension number of the second
part (XX-2) is not available. (XX=jack number)
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Methods.
• Double entry and incompatible entry for these numbers are invalid. Valid entry example: 10
and 11, 10 and 110. Invalid entry example: 10 and 106, 210 and 21.
To avoid making an invalid entry, check the other extension numbers. The default of each
extension number is as follows:
[012] ISDN Extension Number Set
Not stored.
[118] VM Extension Number Set
KX-TD816 – 165 through 170, 177, 178, 181 through 184
KX-TD1232 – 165 through 188
[124] Phantom Extension Number Set
Not stored.
[813] Floating Number Assignment
KX-TD816 – 191 through 194, 196, 198, 291 through 294, 298, 299
KX-TD1232 – 191 through 194, 196 through 198, 291 through 294, 296 through 299
• Programme [004] Extension Name Set is used to name the extension numbers.
Features Guide References
Call Directory
Display Message
EXtra Device Port (XDP)
Flexible Numbering
Intercom Calling
To Next Page
Loading...
