4.4 E1 Line Programming
350 E1 Programming
[720] E1 TIE Ringing Service
Description
Sets a call receiving type for the E1 channels assigned to TIE. If "DIL" is selected, DIL 1:1 or
DIL 1:N will perform.
This programme is available for the KX-TD1232 only.
Selection
• Outside (CO) line number:
25 through 54,
( = all outside lines from 25 to 54)
•Type:
TIE / DIL
Default
All outside lines – TIE
Programming
1.
Enter
720
.
Display: 720 TIE RING
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter an outside line number 25, you can also press
NEXT
.
Display example: CO Line NO? 25
4.
Press
NEXT
.
Display example: CO25:TIE
5.
Keep pressing
SELECT
until the desired selection is displayed.
6.
Press
STORE
.
7.
To programme another outside line, press
NEXT
or
PREV
, or
SELECT
and the desired
outside line number
.
8.
Repeat steps 4 through 7.
9.
Press
END
.
Conditions
If "TIE" is selected for the E1 channels assigned to DR2, then not the DID, but the DIL 1:1 or
DIL 1:N will perform.
Features Guide References
E1 Line Service
TIE Line Service
To Next Page
Loading...
