Panasonic KX-TD816 - Extension Name Set

2.1 Manager Programming
36 General Programming
[004] Extension Name Set
Description
Assigns names to the extension numbers programmed in programme [003] Extension
Number Set.
Selection
•Jack number:
KX-TD816 –
01 through 16 (-1 / -2)
KX-TD1232 –
01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Name:
10 characters (max.)
Default
All jacks – Not stored
Programming
1.
Enter
004.
Display: 004 EXT NAME SET
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering a jack number.
Display: #01-1:Not Stored
4.
Enter a
name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new name.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV
, or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• There is a maximum of 32 names for KX-TD816, and 128 names for KX-TD1232. Each
name has a maximum of 10 characters.