Panasonic KX-TD816 - One-Touch Access for System Features

4.4 E1 Line Programming
360 E1 Programming
[743] E1 CPC (OUT)
Description
Sets a CPC signal detection time to each E1 channel on making a call.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number:
01 through 30
, ( =All E1 channels)
•Time:
00 through 15
( 80 milliseconds is the actual time) (00=no detection)
Default
All E1 channels – 02
Programming
1.
Enter
743
.
Display: 743 E1 CPC OUT
2.
Press
NEXT
.
Display: CH NO?
3.
Enter a
channel number
.
To enter a channel number 01, you can also press
NEXT
.
Display example: CH01:02
4.
Enter a
time
.
To assign no time, press
CLEAR.
5.
Press
STORE
.
6.
To programme another channel, press
NEXT
or
PREV
, or
SELECT
and the desired
channel number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Adjust to a setting of the connected telephone company.
• To assign all channels to one selection, press the key in step 3. In this case, the display
shows the contents programmed for channel 01.
Features Guide References
E1 Line Service