4.4 E1 Line Programming
E1 Programming 361
[744] E1 DID Receive Digit
Description
Sets a maximum number of the received dial digits for each E1 channel assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number:
01 through 30
, ( =All E1 channels)
• Digit to be received:
1 through 7
Default
All E1 channels – 4
Programming
1.
Enter
744
.
Display: 744 DID RCV DIAL
2.
Press
NEXT
.
Display: CH NO?
3.
Enter a
channel number
.
To enter a channel number 01, you can also press
NEXT
.
Display example: CH01:4
4.
Enter a
digit
.
To assign no time, press
CLEAR.
5.
Press
STORE
.
6.
To programme another channel, press
NEXT
or
PREV
, or
SELECT
and the desired
channel number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Adjust to a setting of the connected telephone company.
• To assign all channels to one selection, press the key in step 3. In this case, the display
shows the contents programmed for channel 01.
Features Guide References
E1 Line Service
To Next Page
Loading...
