4.4 E1 Line Programming
362 E1 Programming
[745] E1 DR2 Receiver
Description
Sets a dial receiving type to each E1 channel assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number:
01 through 30
, ( =All E1 channels)
• Dial receiving type:
Pulse / DTMF / MFC-R2 / Undefined
Default
All E1 channels – Undefined
Programming
1.
Enter
745
.
Display: 745 DR2 RCV DIAL
2.
Press
NEXT
.
Display: CH NO?
3.
Enter a
channel number
.
To enter a channel number 01, you can also press
NEXT
.
Display example: CH01:Undefined
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
To programme another channel, press
NEXT
or
PREV
, or
SELECT
and the desired
channel number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Adjust to a setting of the connected telephone company.
• If "Undefined" is selected, the assignment in programme [741] E1 Dial Mode is activated.
• To assign all channels to one selection, press the key in step 3. In this case, the display
shows the contents programmed for channel 01.
Features Guide References
E1 Line Service
To Next Page
Loading...
