4.4 E1 Line Programming
376 E1 Programming
[760] E1 Bit Position for Dial Pulse
Description
Sets a bit position for dial pulse on the E1 line assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
A-bit / B-bit
Default
A-bit
Programming
1.
Enter 760.
Display: 760 DIAL BIT
2.
Press NEXT.
Display example: Dial Bit:A-bit
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
