4.4 E1 Line Programming
E1 Programming 377
[761] E1 Bit Position for Clear Back
Description
Sets a bit position for clear back on the E1 line assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
A-bit / B-bit / AB-bit
Default
A-bit
Programming
1.
Enter 761.
Display: 761 CLEAR BIT
2.
Press NEXT.
Display example: Clear Bit:A-bit
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
