Panasonic KX-TD816 - E1 E&M Signalling Type

4.4 E1 Line Programming
378 E1 Programming
[762] E1 E&M Signalling Type
Description
Sets an E&M signalling type for the E1 line.
Type-1: A-bit control, default setting=0
Type-2: A-bit control, default setting=1
Type-3: B-bit control, default setting=0
Type-4: B-bit control, default setting=1
This programme is available for the KX-TD1232 only.
Selection
Type-1 / Type-2 / Type-3 / Type-4
Default
Type-2
Programming
1.
Enter 762.
Display: 762 E&M SIGNAL
2.
Press NEXT.
Display example: Type-2
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service