4.4 E1 Line Programming
382 E1 Programming
[766] E1 Meter Pulse Detection Mode
Description
Sets the charge meter pulse detection mode for the E1 line assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
No Detection / Outgoing Only / Both Calls
Default
No Detection
Programming
1.
Enter 766.
Display: 766 METER DETECT
2.
Press NEXT.
Display example: No Detection
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
