4.4 E1 Line Programming
E1 Programming 383
[767] E1 Meter Pulse Detection Bit Position
Description
Sets a bit position for charge meter pulse detection on the E1 line assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
A-bit / B-bit / C-bit / D-bit
Default
B-bit
Programming
1.
Enter
767
.
Display: 767 METER BIT
2.
Press
NEXT
.
Display example: Meter Bit:B-bit
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE
.
5.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
