4.4 E1 Line Programming
E1 Programming 391
[775] E1 ANI Service Mode
Description
Sets the Automatic Number Identification (ANI) mode for the E1 line.
This programme is available for the KX-TD1232 only.
Selection
None / Incoming Only / Outgoing Only / Both Calls
Default
None
Programming
1.
Enter
775
.
Display: 775 ANI MODE
2.
Press
NEXT
.
Display example: None
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE
.
5.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
